12
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, moving
it requires two persons.
First, loosen the
upright knob (A).
Next, pull the
upright knob, pull
the upright (B)
backward until the
latch stops the
upright, and then
release the upright
knob.
Next, pull the
upright (B) forward
slightly, lift the
latch (C), and then
lower the upright
to the folded posi-
tion. Hold the
upright in one
of the indicated
locations (D)
while you lower
the upright; do
not hold the
upper body arms.
Next, hold the handle (E) on the front stabilizer and lift
the elliptical until it will roll on the wheels (not shown)
on the rear stabilizer. Then, carefully move the elliptical
to the desired location, and lower it to the floor.
When you are finished moving the elliptical, lift the
upright (B) to the vertical position and tighten the
upright knob (A).
HOW TO ADJUST THE POSITIONS OF THE
PEDALS
Each pedal can
be adjusted to
several positions.
To adjust each
pedal, simply pull
the pedal handle
(F) outward, move
the pedal to the
desired position,
and then release
the pedal handle
into an adjustment hole beneath the pedal. Make sure
to adjust both pedals to the same position.
HOW TO LEVEL THE ELLIPTICAL
If the elliptical
rocks slightly on
your floor dur-
ing use, turn one
or both of the
leveling feet (G)
beneath the rear
stabilizer until the
rocking motion is
eliminated.
HOW TO USE THE TABLET HOLDER
IMPORTANT: The tablet holder (H) is designed
for use with most full-size tablets. Do not place
any other electronic device or object in the tablet
holder.
To insert a tab-
let into the tablet
holder (H), set the
bottom edge of
the tablet in the
tray. Then, pull the
clip over the top
edge of the tablet.
Make sure that
the tablet is firmly
secured in the tablet holder. If applicable to your tab-
let holder model, rotate and/or pivot the tablet holder to
the desired position. Reverse these actions to remove
the tablet from the tablet holder.
A
B
B
D
C
E
B
A
F
H
G
G
