21
THE SETTINGS MODE
1.
Select the settings mode.
To select the settings mode, press
the gear button (K). The first set-
tings screen will appear in the
display. Note: If you have selected
a workout, you may need to press
the Stop button repeatedly to
return to the main menu before
selecting the settings mode.
2.
Navigate the settings mode.
While the settings mode is selected, you can
navigate through several settings screens. Press
the Stop button repeatedly to select the desired
settings screen.
3.
Change settings as desired.
Software Version Number
—The software version
number will appear in the display.
Incline System Calibration
—The letters CAL will
appear in the display. If the incline system is not
functioning properly, it may need to be calibrated.
To calibrate the incline system, press the Incline
increase or decrease button. The treadmill will
automatically rise to the maximum incline level and
then return to the minimum level. When the tread-
mill stops moving, the incline system is calibrated.
NOTE: The treadmill may occasionally calibrate
the incline automatically when the power is
turned on.
Display Test
—This screen is intended to be used
by service technicians to identify whether the
display is working correctly.
Button Test
—This screen is intended to be used
by service technicians to identify whether a certain
button is working correctly.
Total Time
—The word TIME will appear in the
display. The display will show the total number of
hours that the treadmill has been used.
Total Distance
—The letters MI or KM will appear
in the display. The display will show the total
distance (in miles or kilometers) that the walking
belt has moved.
K
Summary of Contents for PFTL69620-INT.0
Page 29: ...29 NOTES...
