11
57
85
57
86
5
3
9. Identify a set of Pivot Covers A and B (85, 86)
and orient them as shown.
Press the Pivot Covers A and B (85, 86) together
around the Right Upper Body Arm (3) and the
Right Upper Body Leg (5), and attach them
with four M4 x 16mm Self-tapping Screws (57);
start all of the Self-tapping Screws, and then
tighten them.
Repeat this step on the other side of the
elliptical.
9
10. Identify the Front and Rear Upright Covers
(51, 54) and orient them as shown.
Press the Front and Rear Upright Covers
(51, 54) together around the Upright (2), and
attach them with four M4 x 16mm Self-tapping
Screws (57); start all of the Self-tapping
Screws, and then tighten them.
57
57
51
54
2
10
Summary of Contents for PRO-FORM 250i
Page 4: ...4 STANDARD SERVICE PLANS...