13
10. Set the console assembly (G) on the Right and
Left Handrails (84, 85). Make sure that no
wires are pinched. Insert the excess Upright
Wire (81) into the Right Upright (90).
Attach the console assembly (G) to the brackets
on the Handrails (84, 85) with four 1/4" x 1/2"
Screws (4); do not fully tighten the Screws
yet.
11. Attach the Pulse Crossbar (93) to the console
assembly (G) with six #8 x 1/2" Screws (1); start
all six Screws, and then tighten them.
Then, firmly tighten the four 1/4" x 1/2"
Screws (4).
10
11
90
G
G
4
4
4
4
85
93
1
1
84
81
