12
13. Hold the Right Upright Cover (86) against the
console assembly. Align the holes in the Right
Upright Cover with the holes in the Right Upright
(85). Attach the Right Upright Cover with two #8
x 3/4" Screws (1).
Attach the Left Upright Cover (80) to the Left
Upright (84) in the same way.
See steps 4 and 6.
Tighten the 3/8" x 4" Patch
Bolts (7).
13
85
84
1
1
80
86
Console
Assembly
12. Set the console assembly on the Handrails (82,
83).
Be careful not to pinch any wires.
Insert
the excess Upright Wire (87) into the Right
Handrail.
Attach the console assembly to the Crossbar
(107) with six #8 x 3/4" Screws (1).
Start all six
Screws, and then tighten all of them.
Attach the two Console Clamps (105) to the
console assembly with four #8 x 1" Screws (53).
12
83
105
53
87
1
1
1
1
Console
Assembly
82
107
