background image

21

HOW TO USE THE STEREO SOUND SYSTEM

To play music or audio books through the console’s 

stereo speakers, you must connect your MP3 player, 

CD player, or other personal audio player to the con-

sole through the MP3 jack.

 

To use the MP3 jack, plug your audio wire into the MP3 

jack. Then, plug your audio wire into a jack on your 

MP3 player, CD player, or other personal audio player. 

Make sure that your audio wire is fully inserted. 

Next, press the play button 

on your MP3 player, CD 

player, or other personal 

audio player. Adjust the vol-

ume on your personal audio 

player or press the volume 

increase and decrease but-

tons on the console.

If you are using a personal CD player and the CD 

skips, set the CD player on the floor or another flat sur-

face instead of on the console.

THE INFORMATION MODE

The console features an information mode that keeps 

track of treadmill usage information. The information 

mode also allows you to select miles or kilometers as 

the unit of measurement and to turn on and turn off the 

display demo mode.

To select the information mode, hold down the Stop 

button, insert the key into the console, and then re-

lease the Stop button. When the information mode is 

selected, the following information will appear in the 

display:  

•   The number of 

hours that the 

treadmill has 

been  

operated.

•   The total number of miles or kilometers that the 

walking belt has moved. 

•   An “E” for English miles or an “M” for metric kilome-

ters. To change the unit of measurement, press the 

Speed increase button.

•   A “d” if the demo mode is turned on. The console 

features a display demo mode, designed to be used 

if the treadmill is displayed in a store. While the 

demo mode is turned on, the console will function 

normally when you plug in the power cord, press the 

power switch into the reset position, and insert the 

key into the console. However, when you remove 

the key, the displays will remain lit, although the but-

tons will not function. To turn on or turn off the demo 

mode, press the Speed decrease button.

To exit the information mode, remove the key from the 

console.

Increase

Decrease

Summary of Contents for PRO-FORM 700 LT

































Reviews: