13
14
14. Press a Pivot Shield (21) onto each Handlebar
Leg (15, 16).
16
15
21
21
13
13. Apply a generous amount of grease to the Pivot
Axle (83).
Slide a Flex Spacer (25) onto the right side of
the Pivot Axle (83).
Next, orient the Right Handlebar Leg (16) as
shown, and slide it onto the right side of the
Pivot Axle (83).
Next, finger tighten an M8 x 18mm Screw (97)
with an M8 x 32mm Washer (64) into the right
end of the Pivot Axle (83).
Then, tighten the M8 x 18mm Screws (97) in
each end of the Pivot Axle (83) at the same
time.
16
25
83
64
97
97
Grease