15
18
18. Tip: Avoid pinching the wires. Attach
the Console (5) to the Upright (4) with four
M4 x 16mm Screws (93); start all the Screws,
and then tighten them.
Avoid pinching
the wires
5
4
93
17
17. Have a second person hold the Console (5)
near the Upright (4). Connect the Upper Wire (6)
and the Pulse Wire (101) in the Upright to the
matching wires or receptacles on the back of the
Console.
If you do not connect the Wires (6, 101)
properly, the Console (5) may become
damaged when you use the trainer. If a
connector on a Wire does not slide easily and
snap into place, turn the connector and try again.
Insert the excess wire into the Upright (4).
5
4
101
6
19
19. Plug the Power Adapter (96) into the receptacle
on the frame of the trainer.
Then, plug the Power Adapter (96) into an
outlet (see HOW TO PLUG IN THE POWER
ADAPTER on page 16).
20. Make sure that all parts are properly tightened. Extra parts may be included. Place a mat beneath the
trainer to protect the floor.
96