27
SYMPTOM: The walking belt slips when walked on
a.
First, remove the key and
UNPLUG THE POWER
CORD.
Using the hex key, turn both idler roller
screws clockwise, 1/4 of a turn. When the walk-
ing belt is correctly tightened, you should be able
to lift each edge of the walking belt 2 to 3 in. (5 to
7 cm) off the walking platform. Be careful to keep
the walking belt centered. Plug in the power cord,
insert the key, and start the walking belt at 1 mph.
Walk on the treadmill and observe the walking belt.
Repeat until the walking belt is properly tightened.
Make sure to adjust the walking belt in small
increments and to observe the walking belt for
a minute after each adjustment.
a