ICON Health & Fitness Pro-Form Carbon E7, User Manual

29

 HOW TO CONNECT TO A WIRELESS NETWORK

To use iFit workouts and to use several other features 
of the console, the console must be connected to a 
wireless network.

1.  

Select the main menu.

 First, turn on the power (see HOW TO TURN ON 
THE POWER on page 21). Note: It may take a 
few moments for the console to be ready for use.

 Next, select the main menu (Home button). When 
you turn on the console, the main menu will appear 
on the screen after the console boots up. If you 
are in a workout, touch the screen and follow the 
prompts to end the workout and return to the main 
menu. If you are in the settings menus, touch the 
back button (arrow symbol) and then touch the 
close button (x symbol) to return to the main menu.

2.  

Select the wireless network menu.

 Touch the menu button (three horizontal lines 
symbol), and then touch 

Wi-Fi

 to select the wire-

less network menu.

3.  

Enable Wi-Fi.

 Make sure that Wi-Fi

®

 is enabled. If it is not 

enabled, touch the 

Wi-Fi 

toggle to enable it.

 4.  

Set up and manage a wireless network 
connection.

 When Wi-Fi is enabled, the screen will show a 
list of available networks. Note: It may take a few 
moments for the list of wireless networks to appear.

 Note: You must have your own wireless network 
and an 802.11b/g/n router with SSID broadcast 
enabled (hidden networks are not supported). 

 When a list of networks appears, touch the desired 
network. Note: You will need to know your network 
name (SSID). If your network has a password, you 
will also need to know the password.

 Follow the prompts on the screen to enter your 
password and connect to the selected wireless 
network. (To use the keyboard, see HOW TO USE 
THE TOUCH SCREEN on page 21.)

 When the console is connected to your wireless 
network, a checkmark will appear next to the 
wireless network name.

 If you are having problems connecting to an 
encrypted network, make sure that your password 
is correct. Note: Passwords are case-sensitive.

 Note: The console supports unsecured and 
secured (WEP, WPA™, and WPA2™) encryption. 
A broadband connection is recommended; perfor-
mance depends on connection speed. 

 Note: If you have questions after following 
these instructions, go to support.iFit.com for 
assistance.

5.  

Exit the wireless network menu.

 To exit the wireless network menu, touch the back 
button (arrow symbol).