18
HOW TO SET UP THE CONSOLE
Before using the treadmill for the first time, set up the
console.
1. Connect to your wireless network.
To access the internet, download iFIT workouts,
and use several other features of the console, you
must connect the console to a wireless network.
Follow the prompts on the screen to connect the
console to your wireless network.
2. Customize settings.
Fill in the form on the screen to set the console
to display the desired unit of measurement and
your time zone. Note: If you need to change these
settings later, see HOW TO CHANGE CONSOLE
SETTINGS on page 24.
3. Log into or create an iFIT account.
Provide your email address, and follow the prompts
on the screen to sign up for or log into your iFIT
account.
4. Check for firmware updates.
Touch the menu button (three horizontal lines
symbol), touch Settings, touch Maintenance, and
then touch Update. The console will check for
firmware updates. See step 5 on page 25 for more
information.
5. Calibrate the incline system.
Touch the menu button (three horizontal lines
symbol), touch Settings, touch Maintenance, touch
Calibrate Incline, and then touch Begin to calibrate
the incline system. See step 6 on page 25 for more
information.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode, see page 19. To use a
featured workout, see page 20. To create a draw-
your-own-map workout, see page 22. To use an iFIT
workout, see page 23.
To view or change console settings, see page 24.
To connect to a wireless network, see page 26.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 30).
