11
11
33
76
14
32
76
72
72
83
83
11. Orient the Right Pedal (33) as shown, and
attach it to the Right Pedal Arm (15) with two
M10 x 45mm Bolts (76), two M10 Washers (72),
and two M10 Locknuts (83);
start both Bolts,
and then tighten the Locknuts.
Attach the Left Pedal (32) to the Left Pedal
Arm (14) in the same way.
15
12
12.
Tip: Avoid pinching the wire.
Attach the
Handlebar (6) to the Upright (2) with two
M8 x 16mm Screws (74), two M8 Split Washers
(90), and two M8 Curved Washers (65);
start
both Screws, and then tighten them.
Avoid pinching
the wire
2
6
74
90
65
