background image

Part No. 197080 R0303A

Printed in China © 2003 ICON Health & Fitness, Inc.

QUESTIONS?

As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:

08457 089 009

Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds
LS11 8JG
UK

csuk@iconeurope.com

Model No. WEEMBE39221
Serial No. 

Write the serial number in the
space above for reference.

CAUTION

Read all precautions and instruc-
tions in this manual before
using this equipment. Save this
manual for future reference.

Serial Number Decal (under seat)

USER’S MANUAL

www.iconeurope.com

Visit our website at

ORDERING REPLACEMENT PARTS

If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON
Health & Fitness, Ltd. office, or write: 

ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds
LS11 8JG
UK

Tel:

Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125

When ordering parts, please be prepared to give the following information:

•  the MODEL NUMBER of the product (WEEMBE39221)

•  the NAME of the product (WEIDER

®

9000 weight bench)

•  the SERIAL NUMBER of the product (see the front cover of this manual)

•  the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING in

the centre of this manual)

08457 089 009

WEIDER is a registered trademark of ICON Health & Fitness, Inc.

Summary of Contents for WEEMBE39221















Reviews: