ICON IP FREEMOTION 850 INTERACTIVE, User Manual

24

 Default  Menu

—The default menu will appear when 

you insert the key into the console or when you 

press the Home button. Press the Enter button 

repeatedly to select the manual main screen or the 

iFit screen as the default menu.

 Firmware  Update

—

For the best results, 

regularly check for firmware updates.

   Note: The matrix will display NOT CONNECTED if 

the console is not connected to a wireless network.

   Press the Enter button to check for firmware 

updates using your wireless network. If an update 

is available, the update will begin automatically. 

   IMPORTANT: To avoid damaging the incline 

trainer, do not turn off the power while the firm-

ware is being updated. The update may take 

several minutes.

   Note: Occasionally, a firmware update may cause 

your console to function slightly differently. These 

updates are always designed to improve your exer-

cise experience.

 Default  Settings

—To restore the console to its  

factory default settings, press the Enter button. 

Note: The console will erase any information that 

you have saved in its memory.

IP Address

—To view the console’s IP address.

 The 

WiFi–Normal

 option will allow you to set up 

a wireless network connection using the console. 

See step 4 for instructions.

 The 

WiFi–WPS

 option will allow you to set up 

a wireless network connection using your WPS 

router. See step 5 for instructions.

 The 

WiFi–Advanced

 option will allow you to set up 

a wireless network connection using your com-

puter, smart phone, tablet, or other Wi-Fi device. 

See step 6 for instructions.

 iFit User Setup

—To set up a different iFit account, 

but maintain the existing wireless connection, 

follow the instructions in the matrix. 

Note: This 

option will rarely be used.

Clear WiFi Setting

—To erase the console’s 

wireless network settings and have it forget the 

currently selected wireless network, follow the 

instructions in the matrix.

Contrast

—To adjust the contrast level of the 

display, press the Incline increase and decrease 

buttons.

4.   Use WiFi–Normal to set up a wireless 

connection.

   This option will allow you to set up a wireless net-

work connection using the console. 

   Note: You will need to know your network name 

(SSID). If your network has a password, you will 

also need to know the password.

    To set up a wireless network connection using the 

console, first press the Enter button.

   Next, set the 

included WiFi 

setup card on 

the console. 

The buttons 

on the WiFi 

setup card are 

referenced in 

the following 

instructions.

   A list of networks will appear in the matrix. Press 

the up and down buttons to highlight the desired 

network. Then, press the Enter button. Note: Do 

not select IFIT_SETUP.

   Note: The time display will show the number of 

the currently-selected access point. The distance 

display will show the total number of access points 

detected.

   If the network has a password, enter the password.  

   A keyboard will appear in the matrix. As necessary, 

press the buttons on the WiFi setup card to select 

the caps option, the number option, or the symbol 

option. 

Card