background image

10

Services

If your Hyperdrive HD1 needs servicing, follow these instructions.

Check our online Help Center at 

http://support.iconproaudio.com/hc/en-us

, for 

information, knowledge, and downloads such as:

1. FAQ

2. Download

3. Learn More

4. Forum

Very often you will find solutions on these pages. If you don’t find a solution, create 

a support ticket at our online Help Center at the link below, and our technical support 

team will assist you as soon as we can.

Navigate to 

http://support.iconproaudio.com/hc/en-us

 and then sign in to submit 

a ticket. 

As soon as you have submitted an inquiry ticket, our support team will assist you to 

resolve the problem with your ICON ProAudio device as soon as possible.

To send defective products for service:

1. 

Ensure the problem is not related to operation error or external system devices.

2. 

Keep this owner's manual. We don't need it to repair the unit.

3. 

Pack the unit in its original packaging including end card and box. This is very 

important. If you have lost the packaging, please make sure you have packed 

the unit properly. ICON is not responsible for any damage that occurs due to 

non-factory packing.

4. 

Ship to the ICON tech support center or the local return authorization. See our 

service centers and distributor service points at the link below:

 

 

If you are located in US

 

 Send the product to:

 

North America

 

Mixware, LLC – U.S. Distributor

 

11070 Fleetwood Street – Unit F.

 

Sun Valley, CA 91352; USA

 

Tel.: (818) 578 4030

 

Contact: www.mixware.net/help

 

 

 If you are located in Europe

 

 Send the product to:

 

 

Sound Service 

 

GmbHEuropean 

 

HeadquarterMoriz-Seeler-Straße 

 

3D-12489 Berlin 

 

Telephone: +49 (0)30 707 130-0

 

 Fax:  +49 (0)30 707 130-189

 

 E-Mail: info@sound-service.eu 

 

If you are located in Hong Kong

 

Send the product to:

 

ASIA OFFICE: 

 

Unit F, 15/F., Fu Cheung Centre, 

 

No. 5-7 Wong Chuk Yueng 

Street, Fotan, 

 

Sha Tin, N.T., Hong Kong.

 

Tel: (852) 2398 2286

 

Fax: (852) 2789 3947

 

Email: info.asia@icon-global.

com

 

5. 

For additional update information please visit our website at:

 

www.iconproaudio.com

Summary of Contents for HyperDrive HD1












Reviews: