11
Diagram 5
1. HW Input 1/2 level metering
Shows the hardware 1/2 input level. (HW In 1/2).
2. HW Output 1/2 level metering
Shows the hardware 1/2 output level.(HW Out 1/2).
3. HW Input 3/4 level metering
Shows the hardware 3/4 input level. (HW In 3/4).
4. HW Output 3/4 level metering
Shows the hardware 3/4 output level.(HW Out 3/4).
5. S/PDIF In 1/2
Shows the S/PDIF 1/2 input level (S/PDIF In 1/2).
6. S/PDIF Out 1/2
Shows the S/PDIF 1/2 output level (S/PDIF Out 1/2).
7. Link switch
Switch to adjust both channels' levels simultaneously.
8. Mute switch
Switch to mute the corresponding channel.
9. “0dB” switch
Switch to instantly adjust the corresponding channel to “0dB” level.
10. Gain control fader
Slide to adjust the gain level for the corresponding channel.
11. Inputs & Outputs Matrix switches
Switch to turn On/Off the corresponding input channel route to the corresponding
output channel. Remember you may route any input(s) to any output(s).
Mixer control panel
The mixers work like a matrix mixer. Activate and adjust the corresponding input or output
channel level. They are very useful and make your inputs and outputs very flexible. You may
route any of your input(s) to any output(s).
6
7
8
9
2
1
10
11
3
5
4
UtrackPro
Ⅲ
