ICON GOLD'S GYM XR 10.1, User Manual

7

2.  Identify the Left Upright Base (13), which is 

marked with a “Left” sticker. 

Orient a Stabilizer (5) so that the square holes 
are facing the floor. 

Attach the Left Upright Base (13) to the Stabilizer 
(5) with two M10 x 47mm Carriage Bolts (44) 
and two M10 Locknuts (40). 

Do not tighten the 

Locknuts yet.

Then, insert two M10 x 47mm Carriage Bolts 
(44) upward into the Stabilizer (5) as shown. 

Repeat this step with the Right Upright Base 
(20) and the other Stabilizer (5). 

5

5

40

40

20

44

Square 

Holes

13

2

ASSEMBLY

•  To hire an authorized service technician to 

assemble the weight bench in your home, call 
1-800-445-2480.

•  Assembly requires two persons.

•  Because of its size and weight, assemble the 

weight bench in the location where it will be used. 
Make sure that there is enough clearance to walk 
around the weight bench as you assemble it.  

•  Place all parts in a cleared area and remove the 

packing materials. Do not dispose of the packing 
materials until you complete all assembly steps.

•  To identify small parts, see page 6.

•  The following tools (not included) may be 

required for assembly: 

two adjustable wrenches 

one rubber mallet 

one standard screwdriver 

one Phillips screwdriver 

Assembly will be more convenient if you have 
a socket set, a set of open-end or closed-end 
wrenches, or a set of ratchet wrenches. To avoid 
damaging parts, do not use power tools.

1. 

 Go to www.workoutwarehouse.com/
registration on your computer and register 
your product.

•   activates your warranty

•   saves you time if you ever need to contact 

Customer Care

•   allows us to notify you of upgrades and offers

 Note: If you do not have Internet access, call 
Customer Care (see the front cover of this 
manual) and register your product.

1

44