Changing the Bank
To use this feature, press BANK LSB (Advanced
+ Bank LSB). It lights up. BANK LSB appears on
the LCD. Use the jogwheel, numbered buttons
or the +/- keys to select a bank number that
corresponds to the bank you wish to select on
your synth. Most synths will use bank
numbers that are the same number as the
MIDI value, that is, to select bank 1, enter a 1.
If your synth uses a ZERO, you may have to try
entering “0” to get the first bank.
Select the value, and press the jogwheel to
enter it. The BANK LSB button will go dark. To
recall which bank was selected, press BANK
LSB (Ad Bank LSB) again. The last
assigned value will reappear at the far right of
the LCD.
GRP A
GRP B
GRP C
GRP D
NRPN
SNAPSHOT
PANIC
GLOB
CHAN
B
MUTE
LAY
123456
DEV. ID
VEL.CURVE PROG
TRANS
CC
CHAN
GLOB
BANK LSB
MIN
MSB
RECALL
ZONE
STORE
OCT
MAX
F P V
29
