30
Control
Channel
1 to 16
Set the midi channel of the pedal
CC
0 to 127
Set the CC value of the pedal
Value
o to 127
Set the value that send togther with selected CC value
Program
Channel
1 to 16
Set the midi channel of the pedal
Program
0 to 127
Set the Program value of the pedal
Value
o to 127
Set the value that send togther with selected Program value
3.8 Expression Pedal
MIDI
message
type
Settings
Value
Description
Note
Channel
1 to 16
Set the midi channel of the pedal
Note
-1(C) to 9(G)
Set the note value of the pedal
Up value
0 to 127
This value will be send when releasing the pressed pedal. It
will be send together with the selected Note value
Down value
0 ro 127
This value will be send when pressing down the pedal. It will
be send together with the selected Note value
Control
Channel
1 to 16
Set the midi channel of the pedal
CC
0 to 127
Set the CC value of the pedal
Value
o to 127
Set the value that send togther with selected CC value
Program
Channel
1 to 16
Set the midi channel of the pedal
Program
0 to 127
Set the Program value of the pedal
Value
o to 127
Set the value that send togther with selected Program value
4.
“Save file” button
Click this button to save your current settings for the InSpire G2. The file is an
“.inspire” file.
5.
“Load file” button
Click this button to load a previously saved “.inspire” setting file for your InSpire
G2.
6. “Send Data” button
Click this button to upload the iMap
TM
software settings to your InSpire G2 via
USB connection.
Note:
You must have connected your InSpire G2 to your Mac/PC, otherwise the
settings upload will not be successful.