15
17.
Make sure that all parts of the elliptical are properly tightened.
Note: Extra parts may be included. To
protect the floor or carpet from damage, place a mat under the elliptical.
15
16
80
79
4
15. Attach the Front Console Cover (79) around
the Upright (4) by pressing the tabs on the
Front Console Cover into the Rear Console
Cover (80).
16.
See step 6.
Tighten the six M8 x 43mm
Bolts (96).
See step 5.
Tighten the eight M10 x 20mm
Screws (91).
Identify the Right Front and Rear Arm Covers
(65, 66).
Attach the Right Front Arm Cover (65) to the
Right Upper Body Arm (61) with two M4 x 16mm
Screws (101).
Attach the Right Rear Arm Cover (66) around the
Right Upper Body Arm (61) by pressing it into
the Right Front Arm Cover (65).
Attach the Left Front and Rear Arm Covers
(67, 68) in the same way.
Then, slide the Upright Cover (81) downward
and press it into the Left and Right Front Shields
(73, 74).
101
61
68
67
65
66
81
73, 74
Summary of Contents for NordicTrack AUDIOSTRIDER 990 PRO
Page 4: ...4...
