background image

18

HOW TO MOVE THE ELLIPTICAL

Due to the size and weight of the elliptical, moving 

it requires two persons. Stand in front of the elliptical, 

hold the upright (A), and place one foot against one of 

the wheels (B). Pull on the upright and have a second 

person lift the handle (C) until the elliptical will roll on 

the wheels. Carefully move the elliptical to the desired 

location, and then lower it to the floor.

HOW TO LEVEL THE ELLIPTICAL

If the elliptical rocks slightly on your floor during use, 

turn one or both of the leveling feet (D) beneath the 

rear of the frame or turn the leveling foot (E) under 

the center of the frame until the rocking motion is 

eliminated.

HOW TO USE THE TABLET HOLDER

IMPORTANT: The tablet holder (F) is designed 

for use with most full-size tablets. Do not place 

any other electronic device or object in the tablet 

holder.

To insert a tablet into 

the tablet holder (F), 

set the bottom edge of 

the tablet in the tray. 

Then, pull the clip over 

the top edge of the 

tablet. Make sure that 

the tablet is firmly 

secured in the tablet 

holder. If applicable 

to your tablet holder 

model, rotate and/or 

pivot the tablet holder to the desired position. Reverse 

these actions to remove the tablet from the tablet 

holder.

A

C

B

D

E

F

Summary of Contents for NordicTrack COMMERCIAL 14.9









































Reviews: