9
5. Identify the right handrail assembly (C).
Attach the right handrail assembly (C) to the
console assembly (A) with two 5/16" x 1 1/2"
Screws (4).
Start both Screws, and then
tighten them.
Attach the left handrail assembly (not shown)
in the same way.
4
4
C
5
A
4. Connect the Upright Wire (84) to the console
wire (B).
See the inset drawing. The connec-
tors should slide together easily and snap
into place.
If they do not, turn one connector
and try again.
IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER.
Insert the wires (B, 84) into the console
assembly (A).
84
4
A
B
84
B
