11
If you purchased the optional MYE receiver to set up a wall of TVs, go to step 11 to install the receiver.
If you did not purchase the optional MYE receiver, go to step 12. To order the optional MYE receiver, see
the front cover of this manual.
11
I
J
G
K
L
11. See the upper drawing. Look in the Upright
(66) and locate the coupler (G) that has a wire
labeled “In” (I) and a wire labeled “Out” (J).
See the inset drawing. Unplug the wire labeled
"In" (I) and the wire labeled "Out" (J) from the
coupler (G), and discard the coupler.
See the lower drawing. Then, plug the wire
labeled “In” (I) into the “In” port on the receiver
(K), and plug the wire labeled “Out” (J) into the
“Out” port on the receiver.
Next, peel the backing (L) off the receiver (K),
and press the receiver onto the Upright (66).
Follow the instructions included with the
MYE programmer to program the receiver.
66
I J
66
G
