6
1
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• If a part is not in the hardware kit, check to see if
it has been preassembled.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 5.
• The following tools (not included) are required for
assembly:
one adjustable wrench
one Phillips screwdriver
a set of metric hex keys
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
1. Identify the Rear Stabilizer (114), which does not
have wheels, and orient it as shown.
Attach the Rear Stabilizer (114) to the Frame
(1) with two M8 x 25mm Patch Screws (44), two
M8 Split Washers (45), and two M8 x 16mm
Washers (110).
44
45
45
110
114
1
110
44