7
3. Have a second person hold the Upright (66) near
the Frame (1).
See the inset drawing. Connect the Upper Main
Wire (42) to the Lower Main Wire (69), connect
the Upper Power Wire (63) to the Lower Power
Wire (64), and connect the Upper TV Coaxial
Cable (68) to the Lower TV Coaxial Cable (67).
See the inset drawing. Locate the covers (A, B)
on the Lower TV Coaxial Cable (67) and on the
Upper TV Coaxial Cable (68). Slide the covers
together and push the small cover (A) into the
large cover (B).
Then, insert the excess wire into the
Upright (66).
Tip: Avoid pinching the wires. Attach the
Upright (66) to the Frame (1) with four M8 x 20mm
Cap Screws (107) and four M8 x 12mm Washers
(108); start all the Cap Screws, and then
tighten them.
3
1
B
A
66
42
69
63
68
64
67
2
2. Attach the Front Stabilizer (19) to the Frame (1)
with two M8 x 25mm Patch Screws (44), two
M8 Split Washers (45), and two M8 x 16mm
Washers (110).
19
1
107
107
108
108
Avoid pinching
the wires
44
45
45
110
110
44