ICON NTEL99413.1, User Manual

22

 HOW TO CHANGE CONSOLE SETTINGS

1.  Select the settings mode.

 To select the settings mode, press the Settings 
button. 

 The display will show the total number of hours that 
the elliptical has been used and the total distance 
(in miles or kilometers) that has been pedaled on 
the elliptical.

 If an iFit module is connected to the console, the 
display will show the words WIFI MODULE or USB 
MODULE. 

 If no module is connected, the display will show 
the words NO IFIT MODULE. If no module is con-
nected, some of the settings options will not be 
available.

2.  Navigate the settings mode.

 While the settings mode is selected, the matrix of 
the display will display several optional screens. 
Press the decrease button next to the Enter button 
repeatedly to select the desired optional screen.

 The lower section of the display will show instruc-
tions for the selected screen. 

Make sure to follow 

the instructions shown in the lower part of the 
display.

 3.  Change settings as desired.

Demo

—The console features a display demo 

mode, designed to be used if the elliptical is dis-
played in a store. Press the Enter button repeatedly 
to turn the demo mode ON or OFF.

Units

—The currently selected unit of measurement 

will appear in the display. To change the unit of 
measurement, press the Enter button repeatedly. 
To view distance in miles, select ENGLISH. To view 
distance in kilometers, select METRIC.

Contrast Level

—The currently selected contrast 

level will appear in the display. Press the Incline 
increase and decrease buttons to adjust the con-
trast level. 

Trainer Voice

—The currently selected setting for 

the audio coach will appear in the display. Press 
the Enter button repeatedly to turn the audio coach 
ON or OFF.

 Default Menu

—The default menu will appear when 

you press the Home button. Press the Enter button 
repeatedly to select the manual mode or the iFit 
menu as the default menu.

Check Status

—The words CHECK WIFI STATUS 

or CHECK USB STATUS will appear in the display. 
Press the Enter button. After a few seconds, the 
status of the iFit module will appear in the display. 
To exit this display, press the Settings button.

Send/Receive

—The words SEND/RECEIVE DATA 

will appear in the display. Press the Enter button. 
The console will then check for iFit workouts and 
firmware downloads.

4.  Exit the settings mode.

 Press the Settings button to exit the settings mode.