13
10. Remove the 5/16" Nut (12) and the 5/16" x 2 1/4"
Bolt (3) from the bracket on the Latch Crossbar
(38).
Align the upper end of the Storage Latch (53)
with the bracket on the Latch Crossbar (38),
and insert the 5/16" x 2 1/4" Bolt (3) through the
bracket and the Storage Latch.
This will push
a spacer (I) out of the Storage Latch; discard
the spacer.
Next, tighten the 5/16" Nut (12) onto the 5/16" x
2 1/4" Bolt (3).
Do not overtighten the Nut; the
Storage Latch (53) must be able to pivot.
Then, lower the Frame (56) (see HOW TO
LOWER THE TREADMILL FOR USE on page
25).
38
3
56
12 I
53
10
11. Set the console assembly (J) on the Left and
Right Handrails (86, 87).
Make sure not to
pinch any wires (K, 81).
Attach the console assembly (J) with four 5/16" x
1/2" Screws (4) and four 5/16" Star Washers
(11);
do not tighten the Screws yet.
11
J
87
86
4
11
4
11
81
K
