12
32
60
30
13
14. Plug the Power Adapter (30) into the receptacle
on the frame of the exercise bike.
Note: To plug the Power Adapter (30) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 13.
15. After the exercise bike is assembled, inspect it to make sure that it is assembled correctly and that it
functions properly. Make sure that all parts are properly tightened before you use the exercise bike.
Note: Extra parts may be included. Place a mat under the exercise bike to protect the floor or carpet.
13. Identify the Right Pedal (60).
Using an adjustable wrench, firmly tighten the
Right Pedal (60) clockwise into the Right Crank
Arm (59).
Tighten the Left Pedal (32) counterclockwise
into the Left Crank Arm (not shown).
Adjust the strap on the Right Pedal (60) to the
desired position, and press the ends of the strap
onto the tabs on the Right Pedal. Adjust the
strap on the Left Pedal (not shown) in the
same way.
Tab
Strap
59
7
3
4
2
1
12
12. Attach the Console Cover (3) to the Handlebar
and to the Console (7) with two M4 x 16mm
Screws (2).
Next, insert the Handlebar Knob (1) into the
Console Cover (3) and into the Handlebar (4),
rotate the Handlebar to the desired angle, and
then tighten the Handlebar Knob.
14
