7
2. Using a flat screwdriver, remove the Shield
Cover (26) from the Left and Right Shields
(37, 58).
Remove and discard the shipping screws and
the shipping tube (not shown) on the rear of the
Frame (50), if necessary.
Set a sturdy piece of packing material under the
rear of the Frame (50). Have a second person
hold the Frame to prevent it from tipping
while you complete this step.
Identify the Rear Stabilizer (44), which has a
handle.
Attach the Rear Stabilizer (44) to the Frame (50)
with two M8 x 70mm Screws (46).
Remove the packing material from under the
rear of the Frame (50).
2
44
26
37, 58
46
50
3. Remove and discard the shipping screws and
the shipping tube (not shown) on the front of the
Frame (50), if necessary.
Set a sturdy piece of packing material under the
front of the Frame (50).
Attach the Front Stabilizer (63) to the Frame (50)
with two M8 x 70mm Screws (46).
Remove the packing material from under the
front of the Frame (50).
3
63
46
50
