11
10. With the help of a second person, hold the con-
sole assembly near the Right Handrail (79) and
the Left Handrail (not shown).
Connect the Upright Wire (85) to the console
wire.
See the inset drawing. The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN YOU TURN ON THE
POWER.
Remove the wire tie from the Upright
Wire.
Console
Assembly
10
Console
Wire
Wire
Tie
79
85
85
Console
Wire
9. Slide the Right Upright Cover (86) onto the
Right Upright (83).
Hold the Right Handrail (79) near the Right
Upright (83). Insert the Upright Wire (85)
through the Right Handrail as shown.
Start two 5/16" x 3/4" Patch Bolts (5) and two
5/16" Star Washers (9) into the Right Handrail
(79) and the Right Upright (83). Then start a
5/16" x 1 1/2" Patch Bolt (4) into the Right
Handrail and the Right Upright.
Do not tighten
the Patch Bolts yet. Be careful not to pinch
the Upright Wire (85).
79
9
5
4
83
86
85
9
