5
Function
Actions
Result
Power On
From Off state, press and hold
power button for 3 seconds
Blue LED flashes 5 times; fol-
lowed by a long beep and then a
short beep. Device goes to
standby mode, Blue LED contin-
ues flashing every 2 seconds
Power Off
In standby, press and hold power
button for 5 seconds
Blue LED flashes followed by
Red LED f 2 short beeps
Pairing
1. From Off state, press and hold
power button 6 seconds
Blue and Red LED flash alter-
nately for a maximum of 10 min-
utes; followed by a short beep
2. Perform device discovery from
console.
3. Search devices from console.
It may take a few seconds to
discover all devices within vicinity.
4. Select device from console.
It may take a few seconds to
make connection.
5. Enter pass key “0000”, then
“OK” to pair the headset with
the console.
The device ID is stored in the
console device listing Blue LED
f 2 short beeps
Pairing
Failed /
Timeout
Devices not paired within
3 minutes.
No sound.
Increase
Volume
Press repeatedly till
desired volume level is reached.
Volume increases per step; Short
beep tones when maximum vol-
ume level is reached.
Total 15 levels.
Decrease
Volume
Press volume - repeatedly till
desired volume level is reached.
Volume decreases per step;
Short beep tones when minimum
volume level is reached.
Total 15 levels.
Mute
+ Vol. / - Vol. press and hold 2.5
seconds.
Beep.
ASD-116 InstructionManual-FINAL02 4/10/10 12:54 PM Page 5
