ICON QCON LITE, User Manual

Dual function encoders

The dual functioned encoder acting as a push-button and a rotary control. When an 
encoder is pressed, it may be used to change modes of operation or to change 
what appears in the display above the channel strips. When an encoder is rotated, 
depending on its assigned function, it can be used to adjust a channel's pan, send
level, or plug-in parameters.

Control buttons

Recording channel control buttons section
REC buttons -

Activate and deactivate the recording state of the associated channel. 

The switch will light red when the channel is armed.

SOLO buttons -

Turn On and Off the solo state of the associated channel. The 

switch will light green when the channel solo state is on and other channels will 
be muted.

MUTE buttons -

 Activate and deactivate the mute state of the associated channel. 

The switch will light blue when the channel is muted.

Motorized fader control buttons section
FLIP button -

Press the FLIP button to swap the parameter settings of the 

motorized fader and the rotary encoder knobs.

Fader < button - 

Shift “one” channel up for the fader. 

Fader > button -

 Shift “one” channel down for the fader.

BANK UP button - 

Shift “eight” channels up for all faders (except the master channel).

BANK DOWN button - 

Shift “eight” channels down for all faders (except the master channel). 

Jog wheel section

Jog wheel -

The jog wheel is used for various purposes specific to the DAW 

application, including shuttle and scrubbing functions.

Zoom control buttons section
Zoom UP/DOWN button –

The Zoom UP/Down button is used to navigate up 

or down through the Graphical User Interface (GUI) of the DAW application. 

Zoom LEFT/RIGHT button - 

The LEFT/RIGHT button is used to navigate left or 

right through the Graphical User Interface (GUI) of the DAW application.

Zoom IN/OUT button - 

Zoom in or out the track horizontally.

Zoom Track –

Zoom in or out the track vertically.

Transport control buttons section

PLAY button -

Activate the play function of the DAW.

STOP button -

Activate the stop function of the DAW.

REC button -

Activate the record function of the DAW.

REWIND button -

Activate the rewind function of the DAW.

FAST FORWARD button - 

Activate the fast forward function of the DAW.

LOOP button -

Activate the loop function of the DAW.

Marker button -

Toggle small Marker mode.

Nudge - 

Toggle small Nudge mode.

Drop - 

Toggle Drop.

Replace - 

Toggle Replace.

Solo - 

Toggle track solo (of selected track).

4a) 

4b) 

5a)

5b) 

3

4

5

6

4