Sub-control buttons
This section of control buttons varies in different DAWs. Qcon Lite is based on
TM
Logic for the settings.
(Note: For different DAWs the labeling may not be perfectly matched.)
Assignment section
TRACK button -
Activate the track parameters of the software
PAN/SURROUND/EQ/Send/Plug-in/Instrument buttons -
These buttons are used
to activate the corresponding effect function of the DAW. They are typically used
in conjunction with the rotary encoder knobs. Press the button, its light will turn
on, and then rotate the rotary encoder knob to adjust the value, which will display
on the LCD directly above.
Automation section
READ button -
Press the READ button to activate the read function of the current
audio track.
WRITE button -
Press the WRITE button to activate the write function of the current
audio track.
Modifiers-While Held Down section
SHIFT button -
Switch to second function.
OPTION button -
Apply function to all tracks or set parameter to minimum/maximum.
CONTROL button -
Engage Group Clutch while held down.
CMD/ALT -
Enable fine mode; shift parameter page by 1 parameter instead of page.
Display Parameters button section
NAME/VALUE
button -
Toggle between parameter name and parameter value display.
7a)
7
7b)
7c)
8
Side Panel Layout
USB port (B-Type)
Functions as a MIDI port to your notebook (or computer) and compatible software.
Also provides power to your Qcon Lite.
1
1
5
