iconBIT HDD90HDMI User Manual
English
4
1.4 Safety Instructions
Please read the safety instructions carefully prior to using the device. Keep the
instructions in an easily accessible location for further use.
Warning signs
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended
to alert the user to the presence
of uninsulated dangerous voltage
within the product’s enclosure
the may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
ALERT: To reduce the risk of electric
shock, do not remove the back cover. No
user serviceable parts inside. Refer
servicing to qualified service personnel.
The exclamation point within an
equilateral triangle, is intended
to alert the user to the presence
of important and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
Precautions concerning power supply:
- Do not plug many devices into one electric socket. This may lead to an overcharge,
combustion or electrical trauma.
- Do not touch the plug with wet hands. This may lead to electrical trauma, short circuiting
and combustion.
- When connecting an electric cable, make sure that the cable is protected from damaging
and is not being subject to any tension.
- It is essential to use the recommended power unit type with characteristics that comply
with the specification.
- If you are not planning to use the media player for a long time, you should disconnect it
from the power system in terms of safety and energy saving. Keep in mind, that even being
in standby mode the device consumes electric energy.
- You should not connect the device to the power system immediately after bringing it from
a cold surrounding to a warm one. Unpack the device and leave it in the warm environment
for 2 to 3 hours to let the condensate evaporate from the inner parts of the device.
Effect of radio interference and magnetic field:
- In case of absence of adequate screening virtually any electronic device becomes subject
to radio interference. In some conditions the radio interferences may affect the operation of
the media player.
- The iconBIT media player is designed in compliance with the FCC/CE standard, as well as
the following statements:
a. This player does not produce any harmful interference or emission;
b. When placed close to a source of strong radio interference the player may not be able to
function properly.
- Do not locate the device close to sources of strong magnetic fields. Such field may
damage data on your hard disk. In such case we will not be responsible for integrity of data
on your hard disk.
Installation precautions:
- The device is designed for indoor usage. Do not expose it to direct sunlight; do not locate
it next to any heat sources, heaters, radiators or refrigerating equipment. The operational
temperature should be within the range of +5°
С
to +35°
С
.
- Protect the device from getting wet as this may lead to combustion or electrical trauma.
- Do not place any containers with liquid on top or next to the player.