iconBIT XDS100GL User Manual
14
2.6 Player Usage
2.6.1 Power On / Off
Power On
After connecting the DC IN jack and press the power button on the remote control, the
player will soon enter the home screen, and the power indicator will turn blue.
Power Off
Press the power button on the remote control, the player will soon enter standby mode, and
the power indicator will turn red. Then unplug the power cord to cut off the power supply.
2.6.2 Menu language
The system language of this player can be set to English or other languages. Change the
language you wish in the setup menu, the selected language will take effect immediately.
2.6.3 External HDD Format
For users who wish to use BT download, Transmission, you need format the external hard
disk on the player before usage. Please refer to the following procedures to format the hard
disk.
Step 1
: Select
OK
on the
Warning
page, press
OK
to confirm.
Note
:
This page can be also accessed via
Setup
->
System
->
Format
menu.
A password needed when you try to format the HDD, please refer to ’
3.1.6 MISC
’ for more
details about the password.
Step 2
: Select
Format
, press
OK
, and then hard disk format will start.
The formatting procedure will be finished within a few minutes. And then you can use the
hard disk properly on the player.
Note
: HDD format will remove all data stored on the hard disk drive. Please take care and
backup your data in advance!