iconBIT XDS100GL User Manual
18
Wired Lan Setup
-
DHCP IP (AUTO)
Select to obtain IP address automatically.
-
FIX IP (MANUAL)
Select to manually input the IP Address, Subnet Mask, Default Gateway, and DNS Server
IP Address.
Wireless Setup
There are 3 mode for you to select,
Infrastructure (AP)
and
Peer to Peer (Ad Hoc)
and
WPS (AP)
mode. Follow the prompting message on the screen and press
Red
button to
choose
Peer to Peer (Ad Hoc)
or
WPS (AP)
mode.
This player can store up to three wireless network connections. Press
OK
to connect, press
Back
to cancel, and press
Zoom
to modify the parameters of the connection, press
Red
button to choose
Peer to Peer (Ad Hoc)
or
WPS (AP)
.
Infrastructure (AP)
Infrastructure mode is used to connect computers with wireless network adapters, also
known as wireless clients, to an existing wired network with the help from wireless router or
access point. Please follow following steps to configure your wireless network .
Step 1: Scanning AP
（
Access Point
）
in your network
Follow the prompting message on the screen and press the
Zoom
button to select
Infrastructure (AP)
mode and update the access points list, and all SSID will be displayed
on the screen.
Step 2: Input WEP
/
WPA key.
Press
OK
to input encryption keys via the virtual keyboard. Press the navigational buttons
to select,
OK
to input,
FR
to move cursor left,
FF
to move cursor right,
Zoom
to switch
between uppercase and lowercase,
Stop
to delete a character,
Red
to make more symbols
available,
Green
to change the language of the virtual keyboard,
OK
to confirm and to start
testing the connection.
The testing process will take for a while, please be patient to wait. If the test is ok, the
network information (Profile Name, IP address, Subnet Mask, Gateway, etc.) will be
displayed on the screen.
Peer to Peer (Ad Hoc)
Peer to Peer mode, which is also called Ad Hoc mode or computer-to-computer mode, is
used to connect wireless clients directly together, without the need for a wireless router or
access point.
