iconBIT XDS100GL User Manual
40
On your router,
-
Configure HTTP Server within your router’s Virtual Server setting and key in the above
IP address in example, 192.168.0.9 and change the public port to 1024 and private port
to 80 which is by default.
-
For your convenience, you can also choose to enable Dynamic DNS and sign up for a
free DDNS domain at any of the website providing such free services. An example
would be
www.dyndns.com
-
At your router’s DDNS page, key in your host name and enter the same user name and
password when you create a DDNS account. Please refer to your router documentation
on getting these information from your router.
To access via HTTP server in your local network, launch a web browser such as Internet
Explorer, Firefox or Safari, and at the address bar, key in
http://192.168.0.9:1024
where
192.168.0.9
is the IP address of your product.
To access via HTTP server from out of your local network, launch a web browser such as
Internet Explorer,Firefox or Safari, and at the address bar, key in either
-
http://123.456.789.000:1024
where
123.456.789.000
is the WAN IP address of
your router. Please refer to your router documentation on getting this information from
your router.
Or
-
Key in
http://DDNS-HOST-NAME:1024
, where
DDNS-HOST-NAME
is the host
name which you have signed up for at your desired DDNS service provider.
4. Upgrading the Firmware
The firmware is the operating system (OS) installed on the device. Firmware upgrades can
bring new features, improvements and bug fixes.
Step 1
: Copy ‘install.img’ to the root directory of a USB stick, and connect it to the USB
HOST port of the player.
Step 2:
Press and hold the
power
/
standby
button on the front panel, and do not loosen.
Step 3
: Plug the power cable into the DC IN jack, wait for about 5 seconds or more, and
then loosen your finger on the
power
/
standby
button;
Firmware installation will start. There is another way for upgrading. Please refer to
USB
Update
in chapter ‘
3.1.6
Miscellaneous
’ for more details.
