iconBIT XDS8003D User Manual
English
20
Peer to Peer mode, which is also called Ad Hoc mode or computer-to-computer mode, is
used to connect wireless clients directly together, without the need for a wireless router or
access point.
WPS (AP)
WPS, Wi-Fi Protected Setup, is used to connect a wireless router directly, without searching
SSID and inputting password. In this mode, you just need to configure the parameters of
your router which support WPS function. There are two modes for you to select, PBC mode
and PIN mode.
PBC:
First press the WPS button on the router or select the button mode in the
configuration menu of the router, then select the PBC mode, the connection process will
take for a while, please be patient to wait.
PIN:
Input the pin code when configure your router, then select the PIN mode, the
connection process will take for a while, please be patient to wait.
3.1.5 Miscellaneous
Use this menu to adjust miscellaneous settings.
Version Info
-
This tab shows you information about the software installed and about the material
components of your player.
Network Info
-
This tab shows you information about your network, MAC Address, IP address Gateway,
Subnet.
USB Upgrade
-
Select to update the firmware via a USB stick.
Key Tone Volume
-
Here you can adjust the volume of key tone.
