ICONICO WC 2, Installation And User Manual

6

www.iconico.es

Not following this danger indication puts user in risk of death.

You might get injured or inflict damages to the direct environment of the 
toilet if you don’t follow the caution indications. 

Please read the manual carefully, before installing or using the product. Pay special attention 

to the safety instructions in order to make sure you can properly enjoy the product. Keep the 

manual always on hand and always supply a copy of the manual if you transfer the product to 

others.

This product is a standalone intelligent toilet with integrated flushing system. The product is 

intended for indoor use only. 

Any other use out of the toilet functions indicated in this manual, will be considered an 

abnormal use for which our company declines any responsibility.

Please read and follow the safety instructions as below.

Do not disassemble the product.

Please operate according to the manual.

You will be exposed to a dangerous situation if you don’t follow strictly the 
warning indications.

Do not add water, detergents or any chemicals inside the toilet.

Keep away from fire.

lt is forbidden.

1. Symbol’s key

DANGER

WARNING

CAUTION

2. Safety instructions

2.1 Normal use

2.2 General advices and warnings

DANGER

Please make sure that the socket has a ground connection, it will avoid some electric shock 

cases and current leakage situations.

• Make sure the power cord is not damaged.

• The power cord can’t be oppressed or squeezed.

• Keep the power cord away from hot surfaces and sharp edges.

• The power mains must be according to the specified voltage and frequency ranges.

• Do not use the toilet in event of a storm. In such case we recommend to unplug the toilet to 

avoid electric damage.

• Do not pull, break, forcedly bend and twist, stretch, curl load or over-clamp the power 

cable.

• To avoid danger of electric shock, do not touch or plug and unplug the power plug with wet 

hands.

• Do not use the toilet when it has an evident malfunction. Disconnect the power immediately, 

close the angle valve and contact our technical service.