background image

11

10

www.iconico.es

User manual WC3

Operation instructions of main unit buttons

1. Long press the [Stop] button (for about 3s), the main unit will 

enter power-off mode (red light will turn off). Long press the [Stop] 

button again, the main unit will return to working mode (red light will 

turn on). In power-off mode, the buttons cannot be used except the 

[Stop] button.

2. While sitting on the unit, a short press to the [Stop] button can 

stop the ongoing front/rear cleaning or drying function. While 

not sitting on the unit, a short press to the [Stop] button switches 

between working mode(red light) and energy saver (blue light).

While sitting on the unit, press [Dry] button to activate the drying 

function. Press [Stop] button to stop drying. It will stop automatically 

after one cycle if the [Stop] button is not pressed. 

While sitting on the unit, press [Front/Move] button to activate 

front cleaning. During the front cleaning process, press  [Front/

Move] button to activatethe front massage cleaning function. 

Press [Stop] button to stop cleaning. 

1. While sitting on the unit, press [Rear/Move] button to activate rear 

cleaning. During the rear cleaning process, press [Rear/Move] button 

to activate the rear massage cleaning function. 

Press [Stop] button to stop cleaning.

 2. While not sitting on the unit, short press [Rear/Move] button, the 

wand will extend outwards to allow access for maintenance cleaning. 

After cleaning is completed, short press [Stop] button to retract 

wand.

Note: 

1. In working mode, the power light is on and Energy Saver light is off. In Energy Saver mode, the power 
light is off and Energy Saver light is on. In standby mode, all lights are off. 
2. All function settings are set to the middle level by default. Once the settings are changed by remote 
control or main unit buttons, these settings will be saved and stay unchanged for the next use.. 

4. Function description of main unit buttons 

5. Remote

 

 

  PRESSURE

POSITION

REAR/MOVE

FRONT/MOVE

        STOP

HOLD TO ECO

DRY

Rear cleaning/massage

Water increasing

Nozzle moving forward

Nozzle moving backwards

Auto front cleaning

Stop/Energy saver

Seat temperature

Flush

Lid open/seat open

This button doesn’t 
work for toilet without 
auto flushing function

Toilet without function of 
lid auto open and close 
don’t have these three 
buttons

Front cleaning/massage

Water reducing

Drying

Auto rear cleaning

Air temperature

Level indicator light

Water temperature

Night light

Lid close/seat close

Lid open/seat close

Summary of Contents for WC 3















Reviews: