v.1.0
11
- To enable phantom power for Analog Inputs 1&2 in Interactive Display, simply touch
the 48V touch zone on the bottom row, then 1 and 2 on the top row.
- To adjust the gain levels for Analog Inputs 1&2 on the Interactive Display, touch In on
the bottom row, and 1 and/or 2 on the top row (depending on whether they’re
independent sources or a stereo pair). Then use the Rotary Knob to adjust the levels.
Subsequent touches of In on the bottom row toggle between Gain Set and Signal Level
modes (as discussed above when we set the output level).
MIDI
The iConnectAUDIO4
+
has one input/output pair of 5-pin MIDI DIN jacks, a single USB
Host jack (for MIDI devices with USB connection instead of 5-pin), and MIDI is routed to
and from both computer devices connected to the USB Device jacks.
Use a
powered
USB hub to connect up to eight USB MIDI devices to the USB Host jack,
otherwise it supplies enough power for a single MIDI device plugged in directly.
There are 29 16-channel MIDI Ports available to be routed between those physical
connections – 464 MIDI channels.
By default, every possible MIDI Port is routed from every device to every other device; if
a device supports multiple Ports, they’re all accessible. The only exception is multiport
USB MIDI Devices, which must be enabled in the iConfig’s MIDI Info tab.
Summary of Contents for iConnectAudio 4+
Page 1: ...v 1 0 Owner s Manual ...
Page 38: ......
