manualshive.com logo in svg

iConnectivity iConnectAudio 4+, Owner'S Manual

The iConnectivity iConnectAudio 4+ is an innovative audio interface that offers high-quality sound and versatility. To explore all its features and unleash its full potential, make sure to download the comprehensive Owner's Manual available for free on our website.

Share
Download
background image

v.1.0 

4 

Table of Contents 

 

 

Warranty ........................................................................................................................... 3 

Compatibility ..................................................................................................................... 3 

What’s in the Box ............................................................................................................. 6 

Quick Start Guide ............................................................................................................. 7 

IMPORTANT NOTES ............................................................................................................. 12

 

Windows Driver Installation ............................................................................................ 13 

Interactive Display .......................................................................................................... 15 

Viewing Modes ........................................................................................................................ 15

 

Basic Operation ...................................................................................................................... 15

 

Rotary Knob Push functions ................................................................................................... 16

 

LED Meter Levels ................................................................................................................... 16

 

The iConnec hardware ................................................................................... 17 

Front Panel ............................................................................................................................. 17

 

Rear Panel .............................................................................................................................. 18

 

iConfig Software ............................................................................................................. 20 

Launching iConfig ................................................................................................................... 20

 

Device Menu ........................................................................................................................... 21

 

Device Info .............................................................................................................................. 22

 

Audio Patchbay ....................................................................................................................... 23

 

Audio Mixer ............................................................................................................................. 25

 

Audio Info ................................................................................................................................ 27

 

MIDI Info ................................................................................................................................. 30

 

MIDI Port Routing ................................................................................................................... 32

 

MIDI Channel Remap ............................................................................................................. 33

 

MIDI Controller Data Filter ...................................................................................................... 33

 

MIDI Controller Data Remap ................................................................................................... 34

 

Troubleshooting .............................................................................................................. 35 

Specifications ................................................................................................................. 36 

Audio ....................................................................................................................................... 36

 

MIDI ........................................................................................................................................ 36

 

Contact iConnectivity ...................................................................................................... 37 

 

 

 

 

Summary of Contents for iConnectAudio 4+







































Reviews:

No comments

Related manuals for iConnectAudio 4+

RigExpert TI-3000 User Manual preview
TI-3000
Brand: RigExpert Pages: 14

Brands by name

Popular brands

Load more brands