DIRECTION OF MIDI DATA
The labels on the DIN connectors describes the flow of MIDI data to and from mio. This means that
the OUT connector must be connected to the IN jack on your device, and the IN connector to the
OUT jack.
IN
O
U
T
1
2
3
mini-USB Connector - connect this to an available port on the computer
iConnectMIDI
1
interface
DIN Connectors - connect these to a compatible MIDI DIN equipped device
4
5
HOW TO CONNECT
Using iConnectMIDI
1
with a Mac or PC:
1 ) Connect the MIDI DIN connectors
to the MIDI device you wish to control
2) Connect the mini-USB A to USB A cable
to the mini-USB B connector
3) Connect the USB A cable to a Mac of PC computer
Using iConnectMIDI
1
with an iOS Device:
1 ) Connect the MIDI DIN connectors
to the MIDI device you wish to control
2) Connect the 30-pin iOS to USB cable
to the mini-USB B connector
3) Connect the 30-pin iOS cable to the iOS device
3
5
1
3
4
1
30-pin iOS to USB cable - use this to connect to an iOS device
mini-USB to USB cable - use this to connect to a computer
