Play
AUDIO
12
User Guide v1.0
Getting Started
Install iConfig and Upgrade Your PlayAUDIO12 Firmware
Before you begin using your PlayAUDIO12, we recommend that you upgrade your unit's firmware to the
latest version using iConnectivity's
iConfig
application. Follow these steps to install the iConfig software
and perform the firmware upgrade:
1.
Download the latest version (4.2.6) of the iConfig software installer.
i. Go to
https://www.iconnectivity.com/software/iconfig
ii. Follow the instructions for downloading the iConfig software installer specific to your computer.
2.
Connect your computer to the PlayAUDIO12.
For Mac and Windows computers, use the USB-
A to USB-B cable that came in the box to connect your computer to the USB Device Port 1 on the
front panel of your PlayAUDIO12 unit.
3.
Launch the
iConnectivity iConfig
installer file.
Connect your computer to the internet. Then,
with your computer connected to the
Play
AUDIO
12
, double-click the
iConnectivity iConfig
installer.
4.
Accept the firmware upgrade if your unit detects that newer firmware is available.
The iCon-
fig software will prompt you to upgrade if a newer firmware version is available. Verify that your
device is connected to USB Device Port 1 and click
Yes
to continue with the upgrade. An
Upgrade
Complete
prompt will appear when the process completes, at which point iConfig's
Device Info
page
will refresh with your PlayAUDIO12's device statistics.
Figure 1: Updating the PlayAUDIO12 firmware
8
Summary of Contents for PLAYAUDIO 12
Page 1: ...User Guide ...
