05
Owner’s manual for iCool Recovery Systems
Before you fill the pool you must connect the 2
hoses provided
ICool hoses have convenient snap fittings that are very quick and easy
to use. Your 2016 model features a built in filteration system to help
keep the water clean.
Water Level
The water level in the pool must be above the water inlet to the pump.
Your iCool must be on the same level surface as the pool. It must not
be above the pool.
STEP 1 & 2
QUICK START GUIDE
The following is a quick start guide to get your iCool up and running quickly, however you should
read the entire manual to get the most out of your iCool.
Optimum Water Level
1.
Connect to top of the pool
2. Connect Water OUT on pump (4)
3. Connect water from bottom of pool (6)
4. Connect this hose to the Chilling system (2)
5. Connect to top OUT of Chilling system (1)
1
3
5
4
6
2
Water OUT, Back to top of pool
Water OUT, Connect to
Inlet of Chiller (2)
Water IN, from pump
Top hose back to top
of pool
Bottom hose back to
bottom of pool
