HMI-043T-RFID User
’
s Manual
IUMHMI043T-BF Ver.1.2A Apr, 2017
28
VGA
Vortex86VGA is a programmable VGA controller in 22mm x 16mm LQFP
128 package. It integrates a PCIe bridge controller and a VGA controller
with 4M-Byte Pseudo SRAM memory (16-bit data width). It also
incorporates 3.3V DVO digital interfaces to support a third party
LVDS/TMDS transmitter.
LAN
The Vortex86DX2 processor is integrated 10/100Mbps Ethernet controller
that supports both 10/100BASE-T and allows direct connection to your
10/100Mbps Ethernet based Local Area Network for full interaction with
local servers, wide area networks such as the Internet.
I/O and IRQ settings can be done by software with the supplied utility
software, or it can be set for Plug and Play compatibility. The controller
supports: Half / Full-Duplex Ethernet function to double channel
bandwidth, auto media detection.
OPERATING SYSTEM SUPPORT
The HMI-043T provides the VGA and LAN drivers for DOS, Linux, and
Windows CE, Please get the drivers from ICOP technical support URL:
HMI-043T is an open-source embedded platform based on Vortex86EXm
SoC, easy-to-use hardware and software integrated. This platform can
support many x86 O/S as well as those running on the original Arduino
base system.
