BYT-35-N2930
User Manual
ICOP Technology Inc.
27
[Disabled],
[Enabled]
resolution
Legacy OS Redirection
On Legacy OS, the Number of Rows and
Resolution
Columns supported redirection.
[80x24],
[80x25]
Putty KeyPad
Select Function Key and Key pad on
[VT100],
[LINUX],
Putty.
[XTERM86],
[SCO],
[ESCN],
[VT400]
Redirection After BIOS POST
The Settings specify if Bootloader is selected
[Always Enable],
[Bootloader]
then Legacy console redirection is disabled
before booting to Legacy OS. Default value
is Always Enable with means Legacy console
Redirection is enabled for Legacy OS.
Legacy Console Redirection Settings
Legacy Console Redirection Settings
Legacy Serial Redirection Port
Select a COM port to display redirection of
[COM1]
Legacy OS and Legacy OPROM Messages
Console Redirection
Console Redirection Enable or Disable
[Disabled],
[Enabled]
Console Redirection Settings
The settings specify how the how the host
Computer and the remote computer (which
the user is using) will exchange date. Both
computers should have the same or
compatible settings.
Terminal Type
VT-UTF8 is the preferred terminal type for
[VT100],
[VT100+],
out-of-band management, The next best
[VT-UTF8],
[ANSI]
choice is VT100+ and then VT100, See
above, in Console Redirection Settings page,
for more Help with Terminal
Type/Emulation.
Bits per second
Select serial port transmission speed. The
[9600],
[19200],
speed must be matched on the other side.
[38400],
[57600],
Long or noisy lines may require lower
[115200]
speeds.
Flow Control
Flow control can prevent data loss from
[None],
[Hardware RTS/CTS],
buffer overflow. When sending date, if the r
[Software Xon/Xoff]
receiving buffers are full, a ‘stop’ signal can
be sent to stop the date flow. Once the
buffers are empty, a ‘start’ signal can be sent
