Configuring and managing the i6800
14
• Default gateway: The default gateway configured for the LAN interface.
• MAC address: The interface's physical address.
The Counters section displays statistical information about the data
The Dynamic Leases section contains information about devices connected to the LAN interface
which have a dynamically assigned IP address. Each device is described with the following
parameters:
• IP address: The IP address assigned to the device.
• MAC Address: The physical address of the connected device.
• Hostname: The connected device's hostname.
• Expires: The lease time of the device's address.
• Remember: The dynamic lease can be remembered as a static lease using the Make static
button. When the button is clicked, the entry will be visible in the Static Leases section.
In order to manually add a static lease use the following steps:
1.
In the IP address field enter the IP address of the device to be connected.
2.
In the MAC address field enter the MAC address of the device.
3.
Check the Enable box if the lease is to be enabled right away. Leave the box blank if the
device will be enabled later.
4.
To add the lease to the list click the Add button.
5.
Save changes by clicking the Save button. Clicking the Apply button is required to apply
the changes to the i6800 database.
The LAN information can be refreshed at any with the Refresh button.
Monitoring the wireless interfaces
The Wi-Fi 802.11b/g/n and Wi-Fi 802.11ac sections contain information about i6800 wireless
interfaces and their access points. These two sections describe separate interfaces, but their
layout is the same.
