Configuring and managing the i6800
22
3.
In order to set a limit of clients that may be connected to your APs, check the Client limit
checkbox and enter the desired client limit value. The maximum value is 32 clients.
4.
Use the Access list behavior radio buttons to define the desired behaviour of the access list:
• allow: allows only the devices in the access list to connect to the AP.
• deny: prevents the devices in the access list from connecting to the AP and allows all the
other devices to connect to it.
• none: completely disables the access list.
5.
Check the appropriate checkbox in the Enabled column to activate the access list entry for
editing. Use the following options to add the Wi-Fi device to the access list:
• Name: this field is used for your reference. It should be set to a meaningful string that
allows to identify a particular device, e.g. “my Lenovo laptop” or “my iPhone”.
• Mac Address: physical address of the wireless adapter in your device. The valid
address must be specified as a string of six octets separated by colons or hyphens, e.g.
02:00:54:FF:4E:01 or 02-00-54-FF-4E-01. The method to determine this address varies
depending on the device. For more information on how to determine this address, please
refer to your device manual.
• Enabled: check this check box to include the device in the current access list. To
temporarily exclude the device from the access list, uncheck it.
• Clear: use this button if you want to permanently remove the device from the access list.
6.
After you have finished editing access list entries, click the Save button to save changes.
To update access list configuration, click the Apply button.
Note
The maximum number of allowed connected clients is 255.