Configuring and managing the i6800
26
Changing administrator settings
The Administration menu provides configuration options for controlling user credentials and
managing LEDs behaviour.
Managing your username and password
Use the following steps to manage your username and password:
Figure 20. UI login password section of the Administration menu
1.
Under the UI login password section complete the following steps:
• Type your new user name in the User name field.
• Enter your old password in the Old Password field.
• Type your new password in the New Password field.
• Repeat your new password in the Retype new password field.
2.
Confirm your changes by clicking the Save button on the bottom bar or click Reset button
to restore default settings.
After applying these settings with the Apply button, the user credentials will be changed and will
take effect during the next login.
Managing LEDs behaviour
Use the following steps to manage i6800 LEDs behaviour:
1.
In the Administration menu click the LEDs submenu to go to the LEDs section.
Figure 21. LEDs section of the Administration menu
2.
From the LEDs drop-down list choose the preferred LEDs behaviour:
• turn on - LEDs remain turned on all the time.
• turn off - LEDs will be turned on again only if an event occurs - LEDs remain turned
off except in case of an error.
• turn off - LEDs will be turned on again only if an event occurs - LEDs remain turned
off except in case of an event.
From the LEDs' brightness drop-down list choose the preferred LEDs brightness level: